Optimasi Penentuan Pemenang Pengadaan Tracker Antenna Menggunakan Metode Simple Additive Weighting (SAW)

  • Fauzhia Rahmasari Fakultas Teknologi Industri Universitas Jayabaya
  • Fogot Endro Wibowo Fakultas Teknologi Industri Universitas Jayabaya
  • Sandy Agung Pangestu Fakultas Teknologi Industri Universitas Jayabaya
DOI: https://doi.org/10.35814/asiimetrik.v3i1.1517
Abstract views: 35 | pdf downloads: 32
Keywords: optimizing, tender, Simple Additive Weighting (SAW)

Abstract

Procurement usually held in a conventional manner which brings direct stakeholders such as committee and bidders. Procurement of goods/services can be done electronically. Electronic procurement is the procurement of goods/services carried out using information technology and electronic transactions in accordance with statutory provisions. In this research will be made a decision support system to facilitate committee in process of determining the winner of procurement by using Simple Additive Weighting (SAW) methods. SAW methods is more favored because of its effectiveness in executing the completion time. There are some criteria which become to base decision, among others, administrative, technical, price, and qualification. Meanwhile, the alternative to used form companies which register as a participant (in this research there are 3 companies and partnerships). The final result in this research is PT. A as first ranks (the winner) with preference value 13,7778. PT. B in order to two (first backup) with preference value 10,7317, and PT.C in order to three (second backup) with preference value 9,7843.

 

Author Biographies

Fauzhia Rahmasari, Fakultas Teknologi Industri Universitas Jayabaya

 

 

 

Fogot Endro Wibowo , Fakultas Teknologi Industri Universitas Jayabaya

 

 

 

Sandy Agung Pangestu, Fakultas Teknologi Industri Universitas Jayabaya

 

 

References

Abdullah, M. R. dan Patintingan, R. I. (2017) ‘Tinjauan Ekonomi Syariah Terhadap Sistem Jual Beli Kopi Secara Tender (Studi Kasus Kecamatan Latimojong Kabupaten Luwu)’, Al-Amwal: Journal of Islamic Economic Law, 2(1), pp. 70–84.

Andriani, D. P. (2016) Aplikasi Komputer dan Pengolahan Data Pengantar Statistika Industri. Universitas Brawijaya Press.

Darmastuti, D. (2013) ‘Implementasi metode simple additive weighting (SAW) dalam sistem informasi lowongan kerja berbasis web untuk rekomendasi pencari kerja terbaik’, JUSTIN (Jurnal Sistem Dan Teknologi Informasi), 1(2), pp. 114–119.

Effendy, D. A. dan Irawan, R. H. (2015) ‘Uji Sensitivitas metode WP, SAW Dan TOPSIS Dalam Menentukan Titik Lokasi Repeater Internet Wireless’, SEMNASTEKNOMEDIA ONLINE, 3(1), p. 2.

Eniyati, S. (2011) ‘Perancangan sistem pendukung pengambilan keputusan untuk penerimaan beasiswa dengan metode SAW (Simple Additive Weighting)’, Dinamik, 16(2).

Johnson, R. A. dan Bhattacharyya, G. K. (2019) Statistics: principles and methods. John Wiley & Sons.

Kusumadewi, S. (2010) Aplikasi Logika Fuzzy. Yogyakarta: Graha Ilmu.

Kutner, M. H., Nachtsheim, C. J. dan Neter, J. (2004) Applied Linear Regression Models. 4th edn. New York: McGraw-Hill Companies, Inc.

Montgomery, D. C., Peck, E. A. dan Vining, G. G. (2012) Introduction to Linear Regression Analysis. 5th edn. John Wiley & Sons.

Rahmasari, F. (2014) Penentuan Pemenang Tender Secara Elektronik Hosting Internet 10 Mbps dengan Menggunakan Metode Weighted Product (WP) dan Metode Analytical Hierarchy Process (AHP). Malang.

Satheesh, M. dan Dhas, J. E. R. (2014) ‘Multi Objective Optimization of Flux Cored Arc Weld Parameters Using Hybrid Grey-Fuzzy Technique’, The Journal of Engineering Research [TJER], 11(1), pp. 23–33.

Satheesh, M. dan Edwin, R. D. J. (2013) ‘Multi objective optimization of flux cored arc weld parameters using fuzzy based desirability function’. Iranian Journal Of Science And Technology Transaction B-Engineering.

Suyanti, S. dan Roestam, R. (2018) ‘Analisis Perbandingan Metode Simple Additive Weighting (SAW) dan TOPSIS dalam Pemilihan Guru Teladan pada SMA Negeri 4 Sarolangun’, Jurnal Manajemen Sistem Informasi, 3(3), pp. 1208–1225.

Wibowo, H. (2010) ‘MADM-TOOL: Aplikasi uji sensitivitas untuk model MADM menggunakan metode SAW dan TOPSIS’, in Seminar Nasional Aplikasi Teknologi Informasi (SNATI).

Widodo, J. (2018) Peraturan Presiden Nomor 16 Tahun 2018, Kemenkumham RI. Available at: https://jdih.lkpp.go.id/regulation/peraturan-presiden/peraturan-presiden-nomor-16-tahun-2018 (Accessed: 17 January 2020).

Published
2021-01-31
How to Cite
Rahmasari, F., Wibowo , F. E., & Pangestu, S. A. (2021). Optimasi Penentuan Pemenang Pengadaan Tracker Antenna Menggunakan Metode Simple Additive Weighting (SAW). Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa & Inovasi, 3(1), 1-8. https://doi.org/10.35814/asiimetrik.v3i1.1517
Section
Articles