Perancangan Proses Manufaktur Mesin Kompos Cair dari Sampah Buah

  • A. M. Nurul Hidayat Program Teknik Mesin D-III Universitas Pancasila
  • Estu Prayogi Program Teknik Mesin D-III Universitas Pancasila
DOI: https://doi.org/10.35814/asiimetrik.v3i1.1766
Abstract views: 83 | pdf downloads: 54
Keywords: design, manufacturing process, liquid compost, fruit waste

Abstract

Many people use rotten / unfit fruit to make liquid compost with fruit aroma to fertilize their plants, processing fruit that is not suitable for use which will be reprocessed to reduce fruit waste in anticipation of health problems, especially when rotten fruit is thrown away Careless places will cause problems for public health however, their tools are not efficient for processing the fruit because the cutting process is still using a kitchen knife so that the production of fruit which is made into liquid compost is slow in production, so a liquid compost machine from fruit waste is needed to speed up production making compost and making more production and processing faster. The purpose of this study was to design a manufacturing process based on the design drawings of a liquid compost machine from fruit waste. The method used is Design for Manufacturing and Assembly (DFMA). The output of this method is a Standard Operational Procedure (SOP) document and an Operation Process Chart (OCP). Based on the calculation results of the liquid compost machine manufacturing process design, the net estimate of manufacturing process time is 392 minutes with a total of 66 activities consisting of operation, assembly and inspection activities.

Author Biographies

A. M. Nurul Hidayat, Program Teknik Mesin D-III Universitas Pancasila

 

 

Estu Prayogi, Program Teknik Mesin D-III Universitas Pancasila

 

 

References

Fathansyah (2014:147) (2019) ‘Limbah Buah Buahan’, Journal Of Chemical Information And Modeling, 53(9), Pp. 1689–1699. Doi: 10.1017/Cbo9781107415324.004.

Hamdan (2015) ‘Buku Strategi Menyusun Sop’, Strategi Pintar Menyusun Sop.

Jati, B. N. And Ermawati, R. (2010) ‘Aplikasi Katalis Dalam Mengkonversi Limbah Plastik Menjadi Energi’, Jurnal Kimia Dan Kemasan. Doi: 10.24817/Jkk.V32i2.2732.

Khasanah, F. N. dkk. (2020) ‘Pelatihan Pemanfaatan Sampah Daun Kering Dan Sampah Sisa Makanan Menjadi Pupuk Organik Cair Dalam Mewujudkan Green House Di Metland Tambun Cluster Fontania’, Diseminasi: Jurnal Pengabdian Kepada Masyarakat, 2(2), Pp. 75–83.

Khasanah, F. N., Rofiah, S. dan Setiyadi, D. (2019) ‘Metode User Centered Design Dalam Merancang Tampilan Antarmuka Ecommerce Penjualan Pupuk Berbasis Website Menggunakan Aplikasi Balsamiq Mockups’, Jast : Jurnal Aplikasi Sains Dan Teknologi. Doi: 10.33366/Jast.V3i2.1443.

Priadythama, I., Susmartini, S. dan Nugroho, A. W. (2017) ‘Penerapan Dfma Untuk Low Cost High Customization Product’, Performa : Media Ilmiah Teknik Industri, 16(1), Pp. 1–8. Doi: 10.20961/Performa.16.1.12740.

Sari, M., Lestari, S. U. dan Awal, R. (2018) ‘Peningkatan Ketrampilan Mahasiswa Dalam Pengelolaan Sampah Organik Untuk Mewujudkan Green Campus Di Universitas Lancang Kuning’, Dinamisia : Jurnal Pengabdian Kepada Masyarakat. Doi: 10.31849/Dinamisia.V2i2.1392.

Sundarta, I., Sari, A. Y. dan Wibowo, H. P. (2018) ‘Pengelolaan Limbah Organik Menjadi Kompos Melalui Pembuatan Tong Super’, Abdi Dosen : Jurnal Pengabdian Pada Masyarakat. Doi: 10.32832/Abdidos.V2i3.186.

Supratman, S., Anshariah, A. dan Bakri, H. (2017) ‘Produktivitas Kinerja Mesin Bor Dalam Pembuatan Lubang Ledak Di Quarry Batugamping B6 Kabupaten Pangkep Propinsi Sulawesi Selatan’, Jurnal Geomine, 5(2), Pp. 59–63. Doi: 10.33536/Jg.V5i2.127.

Waters, T. F. (2017) Fundamentals Of Manufacturing For Engineers. Crc Press.

Published
2021-01-31
How to Cite
Hidayat, A. M. N., & Prayogi, E. (2021). Perancangan Proses Manufaktur Mesin Kompos Cair dari Sampah Buah . Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa & Inovasi, 3(1), 43-56. https://doi.org/10.35814/asiimetrik.v3i1.1766
Section
Articles